High quality gypsum plaster - ALCIMATIK PLUS

ALÇIMATİK PLUS®
concentrator gypsum

Application field
It is suitable for plastering indoor and outdoor brick, air-entrained concrete, concrete, fair-faced concrete, pumice concrete, briquette walls and ceiling surfaces.

Require
You can cover the same square meter with less material.
Brick concrete is applied directly to aerated concrete, pumice blocks and similar materials.
It makes the surface ready for painting in a single layer. No need for a satin finish plaster.
It can be smoothly applied to details of various mixtures, such as windows and doors.
High surface hardness and bright appearance.

application
surface treatment
Surfaces should be free of paint, dust and substances that reduce adhesion.
Repair of cracks and holes should be carried out using a suitable Entegre repair mortar prior to construction.
If necessary, the application surface should be moistened with water before application.
It is used as a primer to enhance adhesion before applying PRİMEL 600® to shiny rough surfaces, concrete ceilings and walls.
Once dry, start applying.

Mortar preparation and application
ALÇIMATİK PLUS® is mixed with a plasterer (14 liters of water/25 kg bag) and sprayed on the surface.
Single layer construction thickness should be between 8mm and 25mm. If the thickness is more than 25 mm, after the first layer is set, the second layer is applied with a maximum thickness of 25 mm. Measure the surface.
When the surface starts to weep, the excess on the surface can be collected with a second measurement. Then, use a spatula for compression and straightening. When the surface has reached sufficient firmness, pull out by slightly moistening the sponge muffin, and collecting the satin. Depending on the ambient temperature, the satin finish on the surface starts to dry, and is then painted with a steel trowel to obtain a perfect finish. Optionally, after 2 hours, the surface can be wetted while hardening and a final surface can be obtained with a steel trowel.
consume
8,0 kg/m² for 1 cm thickness

technical value
Compressive strength, N/mm² ≥ 2.0
Bending strength, N/mm² ≥ 1.0
Set start time, minutes > 50
Response to Fire A1


packaging and storage
• If required, it can be delivered as a pallet or as a shoulder bag in a 25 kg PP bag.
• It is recommended to consume within 6 months from the production date and within 1 week of opening the bag, provided that there are no more than 8 rows in the original packaging and it has not been opened in a dry and frost environment. free environment.

warn
• Prepare the mortar without adding foreign substances (lime, cement, gypsum, etc.).
• It is recommended to complete the application
In the temperature range of +5 °C to +30 °C.
• ALÇIMATİK PLUS should prevent rapid drying in windy weather.
• For applications on ALÇIMATİK® PLUS, wait at least 10 days, depending on the ambient temperature.
• Gypsum mesh is used for joints of different materials and where there is movement.
• Observe the specified field of application and operating instructions.
• Do not breathe directly. In case of accidental contact with eyes, flush eyes with plenty of water and seek medical attention if necessary.
• Please request the Safety Data Sheet for more information.
• Consult us for all other application conditions and technical questions.

Since the day of our establishment, we have created great value with a pioneering and innovative structure. We started lime production in 1978. We are never satisfied with what we have. We've looked into it. We have grown ourselves and our industry has grown with it. We have specialized in stuccoes and mortars, ceramic adhesives and joint fillers in a short period of time and have proven our success in these fields. We are based on the principle of continuous development and innovation. In 1990 we launched the cement-based ready-mixed plaster "Sıvamatik" on the market and in 1991 we pioneered the field of machine plasters. In 1996 we colored the plaster. "Colormatik" is known for its unique application on building facades due to its qualities as plaster and paint. We're bringing the strength of the Entegre brand in the ready-mix plaster and mortar market to the ceramic adhesives and joint fillers category. We also bring a new range of products in the category "Technical Mortar" which we consider to be an important requirement in the industry and "TURUNCU PAKET" which we have developed for external thermal insulation. We understand the requirements of the industry. We invest in building strong structures. As Entegre, we are always by your side to provide the most accurate and quality solutions for every part of the building. Our quality policy is to be a pioneering and dynamic organization that provides continuous added value to the construction industry, invests in technology, applies the most modern systems, is environmentally friendly, does not compromise on quality, meets the requirements and expectations of customers, employees and shareholders , and provide continuous development of the quality management system. As the management of Integrated A.Ş., we consider protecting and not harming the environment in all of our company's activities as fundamental principles of our environmentally friendly approach. We systematically check all our activities for possible damage to the environment in accordance with legal regulations and take the necessary measures in advance and regulate our activities. In all our activities we are taking steps to utilize recyclable waste, to prevent pollution from hazardous environmental waste, to ensure that as much of our waste as possible is recycled and to investigate, develop and implement methods for this purpose to minimize harmful gas emissions and water discharge, reduce the use of limited natural resources, protect natural assets, prevent negative impacts on life, and do not pollute the environment. Our company has established an environmental management system that will meet the requirements set out in the ISO 14001 Environmental Management Standard and publishes the system in writing to ensure the establishment, support and continuity of guidelines and objectives that shall ensure that the environmental management system Execute, maintain and communicate to all employees in all its activities. We train all employees and subcontractors on the environment and ensure they act in a more conscious and proactive manner. The management of Entegre A.Ş. is committed to comply with the current environmental management system and to allocate the resources required for the most efficient operation of the system so that work can be carried out at the prescribed level and within the time.